HP402

Point of Use Regulator

Furniture wall version

For laboratory furnitures. Fitted with a small wall console in front of and a screw behind the wall.

The HP402 is for reducing line pressure to working pressure as a second-stage.

As a standard configuration the point of use regulator will be supplied with shut-off valve and gauge for working pressure, the console and the screwing for fixing. Options are specific inlet and outlet connections or a metering valve fitted.

Downloads

Standard Specification

Make an Enquiry

Technical Details
Application Area
Order Details

Body:	stainless steel 1.4404 electropolished or brass, nickel and matt chrome plated
Seat:	PCTFE
Diaphragm:	1.4435 stainless steel
Gas purity:	≤ 6.0
Max. inlet pressure:	40 bar
Outlet pressure ranges:	0.5-3, 1-6, 1-10 bar
Operating temp.:	-20°C to +70°C
Connections:	inlet: G 1/4" f outlet: G 1/4" f

Especially for gases with high requirements on purity to 6.0.

A special cleaning system for the HP series guarantees the use for ECD applications.

To identify the correct order code for your HP402

Start with the model number, then add the appropriate number options from columns A, B & C in the table below followed by the gas to be used.

HP402-1-3-0-Argon specifies a HP402 model in stainless steel with outlet pressure range of 1-10 bar & G 1/4" female part outlet, for use with Argon gas.

A	B	C
Material	Outlet Pressure Ranges	Outlet Options
1 = stainless steel	1 = 0.5-3 bar	0 = G 1/4" f
2 = brass, nickel and chrome plated	2 = 1-6 bar	1 = compression fitting 6mm
	3 = 1-10 bar	2 = compression fitting 8mm