HP100

Cylinder Pressure Regulator

Single Stage in brass, nickel and matt chrome plated or stainless steel electropolished

The pressure regulator HP 100 is a single stage cylinder pressure regulator and has been developed especially for the gas supply from single cylinders.

The pressure regulator is fitted as a standard with gas specific connections to DIN 477 or any other common national standard and a relief valve.

Make an Enquiry

Technical Details
Application Area
Order Details

Body:	stainless steel 1.4404 electropolished or brass, nickel and matt chrome plated
Seat:	PCTFE
Diaphragm:	1.4435
Leakage Rate:	10^-8 mbar l/s He against atmosphere
Gas purity:	≤ 6.0
Max. inlet pressure:	300 bar
Outlet pressure ranges:	0.1-3, 1-6, 1-12, 1-17 bar
Operating temp.:	-20°C to +70°C
Gauges:	safety version to EN 837-1 KL1.6
Dimensions (wxhxd):	180 x 95 x 125 mm
Weight:	1400 g
Connections:	NPT 1/4” f

Especially for gases with high requirements on purity up to 6.0 and for laboratories and analytics.
A special cleaning system for the HP series guarantees the use for ECD applications.

To identify the correct order code for your HP100

Start with "HP100-", then add the appropriate number options from columns A, B, C & D in the table below followed by the gas to be used.

HP100-1-2-4-3-Argon specifies a HP100 model in stainless steel with 300 bar inlet pressure, 1-12 bar pressure ranges & diaphragm metering valve, for use with Argon gas.

A	B	C	D
Material	Inlet Pressure Ranges	Outlet Pressure ranges	Options for the outlet
1 = stainless steel	1 = 200 bar	2 = 0,1 - 3 bar	0 = 1/4“ NPT - internal thread
2 = brass	2 = 300 bar	3 = 1 - 6 bar	1 = compression fitting 6 mm
		4 = 1 - 12 bar	2 = diaphragm shut-off valve
		5 = 1 - 17 bar	3 = diaphragm metering valve
			4 = flowmeter