HP102

Cylinder Pressure Regulator

Single Stage in stainless steel electropolished with purge system for corrosive gases

HP 102 is a single stage cylinder regulator with integrated inert gas purge system.

The regulator is equipped as a standard with gas specific cylinder connection according DIN 477 or other common national standards, relief valve and inert gas purge system on the high pressure side.

Downloads

Standard Specification

Make an Enquiry

Technical Details
Application Area
Order Details

Body:	stainless steel 1.4404 electropolished
Seat:	PCTFE
Diaphragm:	1.4435
Leakage Rate:	10^-8 mbar l/s He against atmosphere
Gas purity:	≤ 6.0
Max. inlet pressure:	300 bar
Outlet pressure ranges:	0.1-3, 1-6, 1-12, 1-17 bar
Operating temp.:	-20°C up to +70°C
Gauges:	safety version to EN 837-1 KL1,6
Dimensions (wxhxd):	205 x 95 x 205 mm
Weight:	2200 g
Connections:	NPT 1/4” f

For corrosive gases and gas mixtures with high requirements on safety, tightness and compatibility of material.

To identify the correct order code for your HP102

Start with "HP102-", then add the appropriate number options from columns A, B, & C in the table below followed by the gas to be used.

HP102-2-4-3-Argon specifies a HP102 model with 300 bar inlet pressure, 1-12 bar outlet pressure ranges & diaphragm metering valve, for use with Argon gas.

A	B	C
Inlet Pressure Ranges	Outlet Pressure ranges	Options for the outlet
1 = 200 bar	2 = 0.1 - 3 bar	0 = 1/4“ NPT f
2 = 300 bar	3 = 1 - 6 bar	1 = compression fitting 6 mm
	4 = 1 - 12 bar	2 = diaphragm shut-off valve
	5 = 1 - 17 bar	3 = diaphragm metering valve