HP501

Diaphragm Shut-Off Valve

90° metal diaphragm valve PN40

The HP501 is a shut-off valve for point of use regulators.

Downloads

Standard Specification

Make an Enquiry

Technical Details
Application Area
Order Details

Body:	stainless steel 1.4404 electropolished or brass, nickel and matt chrome plated
Diaphragm:	1.4435 stainless steel
Gas purity:	≤ 6.0
Operating temp.:	-20°C to +70°C
Connections:	inlet: G 1/4" f outlet: G 3/8" m

The HP501 can be used with pressure regulator HP410 for laboratory benches or wall mounting. HP501 can be connected with the pipe system from the left, the right and from above.

To identify the correct order code for your HP501

Start with the model number, then add the appropriate number options from columns A & B in the table below followed by the gas to be used.

HP501-1-06-Argon specifies a HP501 model in stainless steel with compression fitting 6mm outlet, for use with Argon gas.

A	B
Material	Outlet Option
1 = stainless steel	06 = compression fitting 6mm
2 = brass	08 = compression fitting 8mm
	10 = compression fitting 10mm