HP400

The HP400 is for bench (laboratory furniture) mounting.

The regulator is mounted on a table column for reducing line pressure to working pressure as a second-stage.

As a standard configuration the point of use regulator will be supplied with shut-off valve and gauge for indicating working pressure.

Options are specific inlet- and outlet connections or a metering valve fitted to the outlet of HP400.

Body:	stainless steel 1.4404 electropolished or brass, nickel and matt chrome plated
Seat:	PCTFE
Diaphragm:	1.4435 stainless steel
Gas purity:	≤ 6.0
Max. inlet pressure:	40 bar
Outlet pressure ranges:	0.5-3, 1-6, 1-10 bar
Operating temp.:	-20°C to +70°C
Connections:	inlet: compression fitting 6mm outlet: G 1/4" f

Especially for gases with high requirements on purity up to 6.0.

A special cleaning system for the HP series also guarantees the use for ECD applications

To identify the correct order code for your HP400

Start with the model number, then add the appropriate number options from columns A, B & C in the table below followed by the gas to be used.

HP400-1-2-2-Argon specifies a HP400 model in stainless steel with 1-6 bar outlet pressure & compression fitting 8mm outlet, for use with Argon gas.

A	B	C
Material	Outlet Pressure Ranges	Outlet Options
1 = stainless steel	1 = 0.5-3 bar	0 = G 1/4" f
2 = brass, nickel and matt chrome plated	2 = 1-6 bar	1 = compression fitting 6mm
	3 = 1-10 bar	2 = compression fitting 8mm