Three-way purge HP 560

Three-way purge

The three-way purge block HP 560 was designed in order to guard against the lack of space in modern gas cylinder cabinets.

For this purpose a short cylinder conections and the close fitting purge valves are installed, which also simplifies the cylinder change and increase the operating safety of the entire armature. The purge block is characterized by a compact design and the purge valves installed lateral over the cylinders shoulders.

It has a small dead volume and by the abandonment of purge capillary a quick evacuation is possible.

Specific features:
A modular construction of the three-way purge block. Assembly and disassembly of all moun- tings attached from the front.

Downloads

Standard Specification

Make an Enquiry

Technical Details
Application Area
Order Details

Body:	stainless steel 1.4404. electropolished
Seat:	PCTFE
Membrane:	1.4435
Leakage Rate:	10^-8 mbar l/s He
Gas purity:	< 6.0
Max. pre-pressure:	300 bar
Operating temp.:	-20°C to +70°C
Manometer:	safety design EN 837-1 KL1.6
Dimensions (wxhxd):	149 x 141,3 x 174 mm
Weight:	2.15 kg
Connections:	DIN477 cylinder connection NPT 1/4 i

Designed especially for gases with high requirements for purity up to 6.0, safety and density.

The stations are ECD – suitable through our special-cleansing-procedure.

To identify the correct order code for your HP560

Start with "HP560-", then add the appropriate number options from columns A & B in the table below followed by the gas to be used.

HP560-1-1-1-Argon specifies a HP560 model in stainless steel with 200 bar inlet pressure & standard gauges, for use with Argon gas.

A	B	C
Material	Inlet pressure	Gauges
1 = stainless steel	1 = 200 bar	1 = standard gauge
	2 = 300 bar