The dome pressure regulator is used as a line pressure regulator.
Without exchanging parts it is suitable for a large outlet pressure range.
Independent of the used material the pressure regulator is applicable for different gases and liquids.
Urgently recommend the connection of a fine filter with max. 40 μ at the inlet of the pressure regulator to protect following components with suitable relief valves against inadmissibly high pressures.
To identify the correct order code for your DH1
Start with the model number, then add the appropriate number options from columns A, B, C, D & E in the table below followed by the gas to be used.
DH1-1-0-1-0-0-Argon specifies a DH1 model in brass with Ø 6.35 seat, EPDM diaphragm, no gauges & G 1" female part inlet/outlet, for use with Argon gas.
A |
B |
C |
D |
E |
Material |
Seat |
Diaphragm |
Gauges |
Inlet/Outlet Options |
1 = brass |
0= Ø 6.35 |
1 = EPDM |
0 = none |
0 = G1" f |
2 = stainless steel |
1 = Ø 12.7 (balanced) |
2 = viton |
1 = with inlet and outlet gauges |
|