SPECIAL GAS + EQUIPMENT CONSULTANTS
CRR Ltd
HD250

HD250

Line pressure regulator

Inlet pressure max. 440 bar and operating pressures up to 250 bar

The line pressure regulator HD 250 is a single-stage pressure regulator for high pressure applications (in- and outlet).

The HD 250 is designed as a piston pressure regulator and reduces the pressure of compressed gases or liquids to a maximum outlet pressure of 250 bar.

Make an Enquiry

  • Technical Details
  • Application Area
  • Order Details
Body: brass, nickel and matt chrome plated or stainless steel
Seat: PCTFE
Elastomer: viton / NBR
Max. inlet pressure: 440 bar
Outlet pressure ranges: 5-250, 1-100, 1-50 bar
Operating temp.: -20°C to +70°C
Size: 131 x Ø 53 mm
Weight: 865 g
Threads: in- and outlet NPT 1/4“ f
  • This pressure regulator is designed for use with high inlet and outlet pressures.
  • High pressure technology
  • Pilot pressure regulator e.g. in controlled systems in connection with dome pressure regulators.
  • The high-grade steel construction with elastomer made of viton compound permits the use of aggressive media with HD 250.

To identify the correct order code for your HD250

Start with "HD250-", then add the appropriate number options from columns A, B, C, D & E in the table below followed by the gas to be used.

HD250-1-1-1-1-03-Argon specifies a HD250 model in brass with NBR Elastomer, 5-250 bar outlet pressure ranges, without guages & 3mm compression fitting outlet, for use with Argon gas.

A B
C D
E
Material Elastomer Outlet pressure ranges Gauge Outlet option
1 = brass, nickel and matt chrome plated 1 = NBR 1 = 5 - 250 bar 1 = without gauges 00 = NPT 1/4“ f
2 = stainless steel
electropolished
2 = viton 2 = 1 - 100 bar 2 = outlet pressure gauge 03 = compression fitting 3 mm
    3 = 1 - 50 bar
 
3 = in- and outlet pressure gauges 06 = compression fitting 6 mm
        08 = compression fitting 8 mm
        10 = compression fitting 10 mm
        12 = compression fitting 12 mm