The dome pressure regulator is used as a line pressure regulator.
Independent of the used material the pressure regulator is applicable for different gases and liquids.
Urgently recommend the connection of a fine filter with max. 40 μ at the inlet of the pressure regulator, to protect following components with suitable relief valves against inadmissibly high pressures.
To identify the correct order code for your Pilot DH1
Start with the model number (in this case 38P), then add the appropriate number options from columns A, B, C, D & E in the table below followed by the gas to be used.
38P-1-0-1-0-0-Argon specifies a pilot DH1 model in brass with Ø 6.35 seat, EPDM diaphragm, no gauges & G 1" female part inlet/outlet, for use with Argon gas.
A |
B |
C |
D |
E |
Material |
Seat |
Diaphragm |
Gauges |
Inlet/Outlet Options |
1 = brass |
0= Ø 6.35 |
1 = EPDM |
0 = none |
0 = G1" f |
2 = stainless steel |
1 = Ø 12.7 (balanced) |
2 = viton |
1 = with inlet and outlet gauges |
|