SPECIAL GAS + EQUIPMENT CONSULTANTS
CRR Ltd
HP450

HP450

Point of Use Regulator

Wall mounting V-Version (system version)

The point of use regulator is ready mounted on a console and is connectred to a permanently laid piping system. It serves as a second stage and reduces the line pressure to an adjustable working pressure. 

1 to 5 regulators with a modular dimension of 100mm can be collectively mounted on one bracket.

The HP450 is fitted with a diaphragm shut-off valve and pressure regulator with pressure gauge as standard. 

Make an Enquiry

  • Technical Details
  • Application Area
  • Order Details
Body: stainless steel 1.4404 electropolished or brass, nickel and matt chrome plated
Seat: PCTFE
Diaphragm: 1.4435 stainless steel
Gas purity: ≤ 6.0
Max. inlet pressure: 40 bar
Outlet pressure ranges: 0.1-1, 0.1-3, 1-6, 1-12 bar
Operating temp.: -20°C to +70°C
Connections: inlet: NPT 1/4" f outlet: NPT 1/4" f

Especially for gases with high requirements on purity to 6.0, secure and leak proof.

Through a special cleaning system the pressure regulators are suitable for ECD-applications.

Suitbale for acetylene with the use of a corresponding flash-back arrestor to EN730.

To identify the correct order code for your HP450

Start with the model number, then add the appropriate number options from columns A, B, C & D in the table below followed by the gas to be used.

HP450-1-2-3-1-Argon specifies a HP450 model in stainless steel with 2-fold point of use regulator, outlet pressure range of 1-6 bar & NPT 1/4" female part outlet, for use with Argon gas.

A B C D
Material Point of Use Regulator Outlet Pressure Ranges Outlet Options
1 = stainless steel 1 = 1-fold 1 = 0.1-1 bar 1 = NPT 1/4" f
2 = brass 2 = 2-fold 2 = 0.1-3 bar 2 = compression fitting 6mm

3 = 3-fold 3 = 1-6 bar  
  4 = 4-fold 4 = 1-12 bar  
  5 = 5-fold